WEB ALIGNMENT UNIT

Related products

• 

  Quick view

  Read more

  SHSB – 320 HEAVY DUTY SINGLE PHASER

  SHSB – 320 HEAVY DUTY SINGLE PHASER

  FLUTE ROLL:
  ▪ 1 SET OF FLUTE ROLL BEARING.
  ▪ THE CENTRE FLUTE ROLLER 320 MM DIA HUNDRED UPTO 50 HRC, GRINDED / HARD CROME PLATED.
  ▪ TOP ROLL 300 MM DIA HARDENED UPTO 50 HRC, GRINDED / HARD CROME PLATED.
  ▪ PRESSURE ROLL DIA 320 MM.
  ▪ COMPLETE FRAME OF THIS HEAVY DUTY SINGLE FACE CORRUGATING MACHINE IS FABRICATED FROM MILD STEEL TO ABSORB VIBRATION AND ACHIEVE SPEED.
  ▪ FLUTE ROLLERS ARE FIXED ON THIS MACHINE OR WITH LATEST DOUBLE BEARING SYSTEM, TO ABSORB HIGH SPEED VIBRATION AND DELIVER MAXIMUM SPEED.
  ▪ VACUUM SUCTION IS PROVIDED AND INSTEAD OF ADOPTER FOR FINGERLESS SYSTEM.
  ▪ THE ROLLER ARE GRINDED AND HARD CHROME PLATING UP TO 40 MICRONS IS COATED ON THE FLUTE ROLLERS.
  ▪ INDIVIDUAL DRIVE BOX {GEAR BOX} SEPARATING DYNAMIC OSCILLATING, IMPROVES RUNNING STABILITY.
  ▪ TRANSMISSION SHAFT’S ABSORBS ALL VIBRATION GENERATED BY THE GEAR BOX, THEREFORE SMOOTH TRANSMISSION IS PASSED ON TO THE CORRUGATING FLUTE ROLLERS AND GUM APPLICANT ROLLER
  · FLUTE ROLLER AND PRESSURE ROLLER ARE PNEUMATICALLY CONTROLLED WITH PRESSURE ADJUSTING SYSTEM PROVIDED IN THE CONTROL PANEL.
  · GLUE APPLICATOR ROLL ENGAGING OR DISENGAGING AS WELL FLUTE FORMATION ARE ALL PNEUMATICALLY CONTROLLED
  · SELF CIRCULATING GLUE SUPPLYING SYSTEM IS AVAILABLE
  · MANUAL ADJUSTMENT SCREW HANDLE SYSTEM IS PROVIDED TO ADJUST GLUE APPLICATION AS PER THE PAPER ROLLER SIZE.
  · DESIGNED SPEED 120 MTR PER MIN
  · AIR COMPRESSOR NOT IN OUR SCOPE.

  Quick view
• 

  Quick view

  Read more

  TRIPLEX PRE HEATER

  TRIPLEX PRE HEATER

  DIAMETER – 762 MM

  PRE HEATER ENHANCED HEAT CONDUCTION MOTORIZED WRAP ANGLE ADJUSTMENT RANGE 60 DEGREE – 220 DEGREE THREE SETS ARE FIXED ONE OVER THE OTHER 2 SETS ARE USED FOR 2 PLY LINER AND BOTTOM SET IS USED BOTTOM PAPER.

  THE WRAP AROUND SYSTEM HELP IN MAINTAINING PERFECT HEAT OF TO ALIVE PROPER PERFORMANCE (SPEED) AND BOUNDING OF BOARD CONTROL PANEL WITH REVERSE FORWARD STARTERS FIXED ON THE MACHINE PRE HEATER DRUM AND SHEET GRINDING ROLLS ARE HARDCROME. IT’S WORKING PRESSURE IS 1.1 – 1.2 MPA. METAL SORT PIPE (SYPHONE) ARE NEEDED TO BE FIXED FOR PERFECT DRAIN.

  Quick view
• 

  Quick view

  Read more

  NC CUT-OFF

  NC CUT-OFF:
  MACHINE DESCRIPTION:

  ▪ THIS MACHINE HAS SPECIAL STRUCTURE, BETTER INTENSITY, AND HIGH PRECISION, HIGH RIGIDITY GRINDING GEAR, HAND PRECISION KNIFE REST. HIGH SPEED CUT PLACID, LOW NOISE, AND DRIVE PART USE AC SERVE MOTOR, COOPERATE INDUSTRY COMPUTER TO CONTROL SYSTEM, CONVENIENT TO OPERATE.

  Quick view
• 

  Quick view

  Read more

  HOT PLATE SECTION

  HOT PLATE SECTION

  • THE CHANNEL FRAMES ON WHICH THE HOT PLATES ARE FIXED ARE FABRICATED / MACHINING AND PROPERLY ALIGNED.
  • LATEST AUTO ALIGNMENT PNEUMATIC SYSTEM ARE FIXED OVER THE HOTPLATES AND WEIGHT SHAFT SYSTEM.
  • THIS AUTO ALLIGNMENT UNIT HELP IN PERFECT ALIGNMENT OF TOP AND BOTTOM FELT.
  • WHILE HIGH SPEED RUNNING OF PLANT NO OPERATOR IS NEEDED. TO ALINE TOP AND BOTTOM BELT.
    THIS SYSTEM IMPROVES MACHINE SPEED AND LIFE OF TOP AND BOTTOM BELT’S LIFE.
  • LET IT BE 3 PLY OR 5 PLY BOARD TRAVELLY ON HOT PLATES AND COOLING PLATES THE BOARDS IS COMPRESSED FOR PERFECT BOARD QUALITY.
  • BY WEIGHT SHAFT AND IMPORTED BELT-WHEN THE PLAN HAS TO STOP FOR ANY REASON MULTIPLE GEAR BOXES ARE FIXED ON THE HEAVY DUTY CHANNEL FRAMES HOLDING THE HOT PLATES AND COOLING PLATES.
  • THIS MULTIPLE GEAR BOXES ARE OPERATOR BY HEAVY DUTY PNEUMATIC CYLINDER THIS 2 NOS.PNEUMATIC CYLINDER LIFT THE COMPLETE WEIGHT SHAFT SYSTEM./ AUTO WEIGHT ALIGNMENT BELT.
  • ALL ARE LIFTED 8 TO 10° ABOVE THE HOT PLATE AND COOLING PLATES ALONG WITH THE BOARD WHICH IS ON THE HOT PLATES WHEN PLANT MUST HAVE STOPPED.
  • THIS SYSTEM CAN BE OPERATED EVEN IF THERE IS A POWER SUPPLY SUDDEN CUT.
  • DUE TO THIS SYSTEM THE LIFE OF BELT IMPROVES AS IT IS NOT IN CONTACT WITH HEATED HOT PLATE WHEN PLANT IS SUDDENLY/EMERGENCY/OR STOP DUE TO LINE BREAKAGE.
  Quick view