FELT ALIGNMENT UNIT-(PNEUMATICALLY AUTO CONTROLLED)

Related products

• 

  Quick view

  Read more

  SIMPLEX PASTING MACHINE

  SIMPLEX PASTING MACHINE

  • LATEST INDIVIDUAL DRIVE SYSTEM FOR EACH LAYER SIMPLIFIES MECHANICAL STRUCTURED.
  • UNUSED LAYERS CAN BE TURNED OF AND SO AS TO AVOID ENERGY WASTE.
  • ADJUSTMENT FOR GAPS BETWEEN APPLICATOR ROLL AND PRESSURE ROLL AND FINE TUNING ON INDIVIDUAL SAME SIDE GLUE SETTING AVAILABLE ON THE MACHINE.
  • FREQUENCY CONVEYOR CONTROLLED AUTOMATICALLY VARIES WITH SPEED OF PRODUCTION LINE. ALSO KNOWN AS AUTOMATIC PORTING SYSTEM.
  • DRIVE FROM MOTORS ARE THROUGH TIMING BELTS TO AVOID ANY VARIATION ON GLUE APPLICATION ON LINER.
  • PRE-HEATER FOR BOTTOM PAPER FIXED ON THE MACHINE FOR BETTER PERFORMANCE OF THE BOARD.
  • A PERFECT DIGREE/ANGLE IS DESIGNED ON THIS MACHINE TO APPLY MINIMUM GLUE ON THE LINER.
  • ARRANGMENT ARE PROVIDED IN THIS MACHINE TO CONTROLLED ANY FLUTE CRUSH WHILE GETTING GLUED.

  Quick view
• 

  Quick view

  Read more

  HYDRAULIC MILL REEL STAND

  HYDRAULIC MILL REEL STAND

  • HYDRAULIC LIFTING OF LOWERING
  • SYMMETRIC CLAMPING AND UNCLAMPING BASED ON CENTRE LINE WITH HYDRAULIC CYLINDER.
  • PAPER ROLLS TRANSFER MOVEMENT BY HYDRAULIC CYLINDER FEATURING LINE ADJUSTMENT FOR PAPER ROLLER ALIGNMENT.
  • ADJUSTABLE ECCENTRIC DEVICE FOR CHUCK BEARING SLEEVES ALLOWING NECESSARY ADJUSTMENTS ACCORDING TO PAPER ROLLS AND ROLLS KNOW AS CONICAL CHUCK FOR NEED HOLDING.
  • CAN LIFT MAX PAPER ROLL DIA 1500 MM /300MM
  • MAX LOADING CAPACITY OF MACHINE-2000 KG’S EACH SIDE.
  • THE WEB TENSION IS CONTROLLED BY MULTI POINT PNUMATIC IMPORTED BREAKS.
  • CONTROL PANEL FIXED FOR EASY OPERATION OF THE STAND.
  • COMPLETE STAND IS FABRICATED WITH MILD STEEL – NO CASTING IS USED IN THE MANUFACTURING OF THIS UNIT.
  • ALL HYDRAULIC PIPES AND KIT IS TOP QUALITY AND ASSURER’S LONG LIFE WITH MINIMUM AND VERY LOW COST MAINTAIN COST MAINTAIN.

  Quick view
• 

  Quick view

  Read more

  WEB ALIGNMENT UNIT

  Web Alignment Unit​

  MACHINE DESCRIPTION:

  ▪ THE MACHINE IS FIXED ON THE OVERHEAD BRIDGE.

  ▪ WORKING OF THIS MACHINE IS TO ALIGN AND ADJUST LINERS OF BOTH CORRUGATION MACHINES.
  ▪ VACUUM SUCTION PUMPS ARE FIXED TO PROVIDE PROPER TENSION OF BOTH CORRUGATION MACHINE’S. THIS SYSTEM PROVIDES PERFECT TENSION CONTROL WHILE FEEDING THE USER IN BAKER STAND.
  ▪ THE PERFECT TENSION HELP’S IN ACHIEVING MINIMUM GLUE APPLICATION ON THE LINERS OF BOTH CORRUGATION M/C’S.
  ▪ THE LEFT AND RIGHT ALIGNMENT IS CONTROLLED WITH GEAR MOTOR’S AND SCREW SYSTEM.
  ▪ ALL GEAR MOTORS ARE SYNCHRONISED AND CONTROLLED THROUGH A CONTROL PANEL FIXED AND PROVIDED ALONG WITH THE MACHINE.
  ▪ 3 H.P. VACCUME PUMP IS FIXED ON WEB ALLIGNMENT UNIT.
  ▪ REVERSE / FORWARD STARTERS ARE FIXED.
  ▪ OPERATE TO ALIGN THE 2 PLY LINER.
  ▪ AS WEB 1 H.P. X 2 = 2 H.P. IS USED FOR WEB ALIGNMENT.
  ▪ 3 H.P IS USED FPR VACUM SUCTION.
  ▪ TOTAL 5 H.P. IS USED FOR WEB ALIGNMENT UNIT.

   

  Quick view
• 

  Quick view

  Read more

  SIMPLEX PRE HEATER

  SIMPLEX PRE HEATER

  L.H.S & R.H.S FRAME OF THIS IS FABRICATED FROM MILD STEEL.

  WRAP AROUND PRE-HEATER 30″ DIAMETER SHALL BE FIXED BEFORE CORRUGATION MACHINE FOR THE BOTTOM PAPER AND BEHIND FOR
  FLUTING PAPER.

  GEAR MOTOR ALONG WITH WORM GEAR SYSTEM IS PROVIDED, WRAP AROUND SHALL HELP IN ACHIEVING THE EXACT AMOUNT OF HEAT
  REQUIRED ON PAPER TO MAINTAIN MOISTER ON PAPER

  SPECIALLY DESIGNED FOR STEAM HEATING SYSTEM. PRESSURE NEEDED 1.1 -1.2 MPA.

  Quick view