STACKER FOR N C CUT OFF MACHINE

Related products

• 

  Quick view

  Read more

  SHSB – 300 – HEAVY DUTY SINGLE PHASER

  SHSB – 300 – HEAVY DUTY SINGLE PHASER

  FLUTE ROLL:

  • 1 SET OF FLUTE ROLL BEARING.
  • THE CENTER FLUTE ROLLER 320 MM DIA HUNDERED
  • UPTO 50 HRC, GRINDED / HARD CROME PLATED.
  • TOP ROLL 300 MM DIA HARDENED UPTO 50 HRC,
  • GRINDED / HARD CROME PLATED.
  • PRESSURE ROLL DIA 320 MM.
  Quick view
• 

  Quick view

  Read more

  DOUBLE PROFILE MODEL: SDR –320

  DOUBLE PROFILE MODEL: SDR –320.

  ONE SET OF TOOL BOX WITH TOOL SET.
  FLUTE ROLL:
  · 2 SET OF FLUTE ROLL BEARING.
  (ANY 2 SETS)
  · ROLL 320 MM DIA (EN-24 MATERIAL) HARD CHROME PLATED. HARDEN UPTO 50 HRC.
  · TOP ROLL 298 MM DIA (EN-24 MATERIAL) – HARD CHROME PLATED 50 HRC.
  · PRESSURE ROLL DIA 320 MM (EN-9 MATERIAL) GRINDED HARD CHROME PLATED.
  b) VACUUM JACKET FITTED ON THE PROFILES.
  c) 1 SET OF FLUTE ROLLER CAN BE USED AT ONE TIME.
  d) CHANGE THE FLUTE ROLL’S IN LESS THAN 3 MINUTES WITH HYDRAULIC POWER PACK.
  e) PRE- SHOWERS FOR STEAM ARRANGEMENT.
  f) REDUCTION GEAR BOX HEAVY DUTY
  g) THE UP AND DOWN OF UPPER CORRUGATING ROLL IS OPERATED MECHANICALLY. BY SCREW SYSTEM AND MANUAL LOCKING IS PROVIDED.
  h) COMPLETE ARRANGEMENT FOR GAS / ELECTRIC HEATING AS PER YOUR REQUIREMENT.
  i) THERE ARE ARRANGEMENTS PROVIDED IN CORRUGATION MACHINE TO SET THE TAPPER OF THE FLUTE IF THERE IS ANY.
  j) VACUUM SECTION BOX FITTED ON THE CENTRE FLUTE ROLLER (LATEST TYPE) FOR PAPER SUCTION INSTEAD OF ADOPTERS.
  k) BLOWER’ SHALL BE USED FOR SUCTION ALONG WITH 20 H. P. MOTOR.
  l) COMPLETE PIPE LINE WITH CLIPS SHALL BE PROVIDED ALONG WITH ALUMINIUM CASING FOR THE VACUUM BOX.
  m) VARIABLE SPEED DRIVE 15 H. P. DRIVES IS ALSO BE PROVIDED TOUCH SCREEN..
  n) GLUING ROLL AND DOCTOR ROLL HAVE BEEN ASSEMBLED PRECISE MICRO ADJUSTING DEVICE RESPECTIVELY FOR OBTAINING EXACT DISTANCE.
  j) PRE-HEATING ROLL DIAMETER 300MM X 1 PC. FOR BOTTOM PAPER.
  k) COMPLETE FRAME OF THE M/C IS FABRICATED FROM MILD STEAL TO ABSORB VIBRATION AND ACHIVE SPEED.
  l) ALL FLUTE ROLLER’S AND PRESSURE ROLLER’S ARE FIXED ON DOUBLE BEARING SYSTEM.
  EACH FLUTE ROLLER ARE FIXED ON 4 BEARING’S A- TOTAL OF 20 BEARING ARE FIXED FPR 2 SET’S OF FLUTE ROLLER AND ONE PRESSURE ROLLER.

  Quick view
• 

  Quick view

  Read more

  FELT ALIGNMENT UNIT-(PNEUMATICALLY AUTO CONTROLLED)

  FELT ALIGNMENT UNIT-(PNEUMATICALLY AUTO CONTROLLED)

  Technical Details

  • The System is fixed on the felt unit “over the hot plates” to control the alignment of felt.
  • It is adapted with a Pneumatic S.S. plate as guide to control the Left & right movement of felt.
  • This system is provided to enhance the life of the felt.
  • With this system we can increase the speed of plant as the system assures to keep the felt aligned at any speed.
  • Provided with heavy duty guide roller & auto adjustable bearings.
  • This system is used for both 3 ply & 5 ply plants
  Quick view
• 

  Quick view

  Read more

  DUPLEX PASTING MACHINE UNIT

  DUPLEX PASTING MACHINE

  • LATEST INDIVIDUAL DRIVE SYSTEM FOR EACH LAYER SIMPLIFIES MECHANICAL STRUCTURED. UNUSED LAYERS CAN BE TURNED OF AND SO AS TO AVOID ENERGY WASTE. ONE UNIT CAN BE USED AT ONE TIME IF MACHINE IS RUNNING TO PRODUCE 3 PLY BOARD FOR 5 PLY BOTH UNITS ARE AUTOMATICALLY SYNCHRONIZED.
  • ADJUSTMENT FOR GAPS BETWEEN APPLICATOR ROLL AND PRESSURE ROLL AND FINE TUNING ON INDIVIDUAL SAME SIDE GLUE SETTING AVAILABLE ON THE MACHINE. FREQUENCY CONVEYOR CONTROLLED AUTOMATICALLY VARIES WITH SPEED OF PRODUCTION LINE. ALSO KNOWN AS AUTOMATIC PORTING SYSTEM.
  • DRIVE FROM MOTORS IS THROUGH TIMING BELTS TO AVOID ANY VARIATION ON GLUE APPLICATION ON LINER.
  • PRE-HEATER FOR BOTTOM PAPER FIXED ON THE MACHINE FOR BETTER PERFORMANCE OF THE BOARD.
  • A PERFECT DEGREE/ANGLE IS DESIGNED ON THIS MACHINE TO APPLY MINIMUM GLUE ON THE LINER.
  • ARRANGMENT ARE PROVIDED IN THIS MACHINE TO CONTROLLED ANY FLUTE CRUSH WHILE GETTING GLUED.

  Quick view